Deteksi Defect Proses Produksi Sarung Menggunakan ATBM Berbasis Metode Failure Mode and Effect Analysis

  • Selly Nurdianti Khasanah Universitas Muhammadiyah Gresik
  • Nina Mahbubah Universitas Muhammadiyah Gresik
  • Hidayat Hidayat Universitas Muhammadiyah Gresik

Abstract

Small and medium firms are considered as the national safety net in times of crisis. UKM ACA is a medium-sized business and is recognized as a home industry that maintains sustainable quality. The purpose of this study is to identify defects and design better scenarios to improve product quality. This research begins with mapping the production process flow to identify product defects. After the product defect is obtained, the next step is to calculate the risk priority number. The study results showed three defects: the faded color with RPN 84, thread break with RPN 72, and irregular motifs with RPN 60.

Downloads

Download data is not yet available.

References

Y. A. Fauzi and H. Aulawi, “Analisis Pengendalian Kualitas Produk Peci Jenis Overset Yang Cacat Di Pd. Panduan Illahi Dengan Menggunakan Metode Fault Tree Analysis (Fta) Dan Metode Failure Mode and Effect Analysis (Fmea)”,” J. Kalibr., vol. 14, no. 1, pp. 29–34, 2016, doi: 10.33364/kalibrasi/v.14-1.331.
[2] F. S. Pratama and S. Suhartini, “Analisis Kecacatan Produk dengan Metode Seven Tools dan FTA dengan Mempertimbangkan Nilai Risiko berdasarkan Metode FMEA,” J. Senopati, vol. 1, no. 1, pp. 41–49, 2019, [Online]. Available: https://ejurnal.itats.ac.id/senopati/article/view/534.
[3] A. Lestari and N. A. Mahbubah, “Analisis Defect Proses Produksi Songkok Berbasis Metode FMEA dan FTA di Home - Industri Songkok GSA Lamongan,” Serambi Eng., vol. VI, no. 3, pp. 2197–2206, 2021, doi: https://doi.org/10.32672/jse.v6i3.3254.
[4] Suparjo and M. B. Setiyawan, “Pengendalian Kualitas Produk Handle SS Belly Shape dengan Menggunakan Metode Failure Mode and Effect Analysis ( FMEA ) dan Fault Tree Analysis ( FTA ) di CV . XYZ,” in Seminar Nasional TEknologi Industri Berkelanjutan I (SENASTITAN I), 2021, pp. 43–51.
[5] D. P. Sari, K. F. Marpaung, T. Calvin, and N. U. Handayani, “Analisis Penyebab Cacat Menggunakan Metode FMEA Dan FTA Pada Departemen Final Sanding PT Ebako Nusantara,” in Prosiding Seminar Nasional Sains dan Teknologi, 2018, pp. 125–130.
[6] A. F. Rislamy, N. A. Mahbubah, and D. Widyaningrum, “Analisis Risiko Kerusakan Pada Alat Berat Grab Dengan Metode Failure Mode And Effect Analysis ( Study Kasus : Pt Siam Maspion Terminal Gresik ),” Profisiensi, vol. 8, no. 1, pp. 36–43, 2020, doi: https://doi.org/10.33373/profis.v8i1.2553.
[7] M. F. Thariq and F. Fahma, “Analisis Penyebab Terjadinya Produk Gagal Pada Spunpile di PT XYZ Menggunakan Metode FMEA dan FTA,” in Seminar dan Konferensi Nasional IDEC, 2020, no. November, pp. 1–10.
[8] V. Kartikasari and H. Romadhon, “Analisa Pengendalian dan Perbaikan Kualitas Proses Pengalengan Ikan Tuna Menggunakan Metode Failure Mode And Effect Analysis (FMEA) dan Fault Tree Analysis (FTA) Studi kasus di PT XXX Jawa Timur,” J. Ind. View, vol. 1, no. 1, pp. 1–10, 2019, doi: 10.26905/jiv.v1i1.2999.
[9] E. A. Erkhananda and D. Janari, “Risiko Penyebab Cacat Button Dengan Metode FMEA Dan FTA Pada Departemen Warehouse,” Buana Ilmu, vol. 5, no. 1, pp. 89–100, 2021, doi: https://doi.org/10.36805/bi.v5i2.1506.
[10] A. Rachman, H. Adianto, and G. . Liansari, “Metode, Perbaikan Kualitas Produk Ubin Semen Menggunakan Keramik, Failure Mode and Effect Analysis Dan Failure Tree Analysis Di Institusi,” J. Online Inst. Teknol. Nas., vol. 4, no. 2, pp. 24–35, 2016.
[11] J. Supono, “Analisis Penyebab Kecacatan Produk Sepatu Terrex Ax2 Goretex Dengan Menggunakan Metode Fault Tree Analysis (Fta) Dan Failure Mode and Effect Analysis (Fmea) Di Pt.Panarub Industri,” J. Ind. Manuf., vol. 3, no. 1, pp. 15–22, 2018, doi: 10.31000/jim.v3i1.615.
[12] D. K. R. Kuncoro, P. A. N. Pratiwi, and Y. Sukmono, “Pengendalian Risiko Proses Produksi Crude Palm Oil Dengan Metode Failure Mode And Effect Analysis (Fmea) dan Fault Tree Analysis (FTA),” J. Ilm. Tek. Ind., vol. 1, no. 1, pp. 01–06, 2018, [Online]. Available: http://e-journals.unmul.ac.id/index.php/TI/article/view/1741.
Published
2021-11-28
How to Cite
KHASANAH, Selly Nurdianti; MAHBUBAH, Nina; HIDAYAT, Hidayat. Deteksi Defect Proses Produksi Sarung Menggunakan ATBM Berbasis Metode Failure Mode and Effect Analysis. JATI EMAS (Jurnal Aplikasi Teknik dan Pengabdian Masyarakat), [S.l.], v. 5, n. 3, p. 143-150, nov. 2021. ISSN 2550-0821. Available at: <https://journal.fdi.or.id/index.php/jatiemas/article/view/502>. Date accessed: 02 july 2022. doi: https://doi.org/10.36339/je.v5i3.502.