Pembuatan Tempat Wudhu Otomatis Menggunakan Sensor Pada Mesjid Al-Anshor Kota Ambon

  • Sefinath J. Wattimena Politeknik Negeri Ambon
  • Rina Latuconsina Politeknik Negeri Ambon
  • Indra Wahyudi Universitas Darussalam Ambon

Abstract

Saving water is one of the crucial needs because of the large number of users. It obviously can be seen from availability of clean water in Ambon, especially in the Kebun Cengkeh area, Sirimau District. The fact actually shown from the consumption of clean water from the water tank. This problem frequently occurred in Pinang Putih Puncak, Hative Kecil Village area, the Al-Anshor mosque. The use of manual faucets causes waster wastage. Furthermore, it can spread the virus sticking to the water faucet and it will transfer to another faucet. As a result, it is necessary to install automatic water faucets to prevent the spread of the corona virus and water saving. The method was needs analysis, designing tools, making tools, testing tools, handing over tools to partners and conducting demonstration or socialization of the use of tools. The results have proven, first, the use of this automatic ablution device was very positive and can be used easily.

Downloads

Download data is not yet available.

References

1. Rina Latuconsina, dkk, (2017) Pemanfaatan Sensor PIR (Passive Infrared Receiver) dan Mikrokontroler Atmega 16 Untuk Efisiensi Pemakaian Air Wudhu, Jurnal Informatika Pengembangan IT, Politeknik Harapan Bersama. Vol 2, No 2 : 18-22
http://dx.doi.org/10.30591/jpit.v2i2.525
2. Asni Tafrikhatin, (2020), Penerapan Kran Otomatis Guna Pencegahan Covid-19 untuk Masjid Jami Al-Istiqomah di Kelurahan Setrojenar, Kecamatan Bulus Pesantren, kabupaten Kebumen, Program Studi Teknik Elektronika, Politeknik Dharma Patria, Indonesia.
3. Muhammad Hidayatullah dkk, (2016), Sistem Kendali Keran Wudhu Otomatis Menggunakan Sensor Passive Infra Red (PIR) Berbasis Mikrokontroller ATmega 8535L Untuk Menghemat Penggunaan Air, Jurnal Tambora. Vol. 1 No. 2 (2016): EDISI 1.
https://doi.org/10.36761/jt.v1i2.138
4. Stephan Adriansyah Hulukati & Irvan A Salihi (2018). Rancang Bangun Alat Wudhu Otomatis Berbasis Arduino Uno Di Mesjid Al – Ichsan Gorontalo, Jurnal Dielektrika, [P-ISSN 2086-9487] [E-ISSN 2579-650x], Vol. 5, No. 2 : 116 – 124.
5. Refni Wahyuni, Ismail Wiyono, Hendry Fonda, (2020), Rancang Bangun Kran Wudhu Otomatis Dan Pengisian Tank air Otomatis Pada Stmik Hang Tuah Pekanbaru Berbasis Arduino Uno, Jurnal Ilmu Komputer : JIK. 2020;9 (2): 107 - 116107-116
6. Untung Setiabudi, (2014) Kran Wudhu Otomatis Menggunakan Sensor Jarak Berbasis Mikrokontroler Atmega 8535, Program Studi Diploma Iii Teknik Elektronika, Jurusan Teknik Elektro, Fakultas Teknik, Universitas Jember.
Published
2021-11-17
How to Cite
WATTIMENA, Sefinath J.; LATUCONSINA, Rina; WAHYUDI, Indra. Pembuatan Tempat Wudhu Otomatis Menggunakan Sensor Pada Mesjid Al-Anshor Kota Ambon. JATI EMAS (Jurnal Aplikasi Teknik dan Pengabdian Masyarakat), [S.l.], v. 5, n. 3, p. 109-112, nov. 2021. ISSN 2550-0821. Available at: <https://journal.fdi.or.id/index.php/jatiemas/article/view/464>. Date accessed: 03 july 2022. doi: https://doi.org/10.36339/je.v5i3.464.