Sosialisasi Perbaikan Metode Kerja Dengan Prinsip 5S Berdasarkan Identifikasi Hazard Di CV. Epen Garage X Azizskip

  • Tri Novita Sari Universitas Indraprasta PGRI
  • Masri Pradipto Universitas Indraprasta PGRI
  • Sri Hartini Universitas Indraprasta PGRI

Abstract

Occupational Safety and Health (OSH) is a safe and healthy condition when doing work. This safe and healthy condition are useful for both workers, companies or organizations and for the environment around the workplace. OSH is an important aspect in workshop, including CV. Epen Garage X Azizskip which is a motorbike repair workshop located in Citeuteup area, Bogor City, West Java. OSH will be created if there is no potential danger or hazard, therefore it is necessary to identify hazards in the workshop. This study aims to identify hazards using Hazard and Operability Study (HAZOP) method and work improvement using Seiri, Seiton, Seiso, Seiketsu dan Shitsuke (5S) method. The types of hazards, risk levels and sources of hazards will be identified by the HAZOP method. Generally the hazards in the workshop are because workers do not use Personal Protective Equipment (PPE) such as work clothes, gloves, safety shoes, safety goggles and also messy workshop condition. After identifying the types of hazards, a work improvement method is needed to prevent accidents in workshop, using the 5S method.

Downloads

Download data is not yet available.

Author Biographies

Masri Pradipto, Universitas Indraprasta PGRI

Prodi Teknik Industri

Sri Hartini, Universitas Indraprasta PGRI

Prodi Teknik Industri

References

[1]. A. D. P. Sujoso, Dasar Dasar Keselamatan dan Kesehatan Kerja, Jember: Jember University Press, 2012.
[2]. J. Dunjo, V. Fthenakis, J. A. Vilchez and J. Arnolds, "Hazard and Operability (HAZOP) Analysis. A literature review," Hazardous Materials, vol. 173, pp. 19-32, 2009.
[3]. A. B. Prakoso, "Hazard And Operability Study (HAZOP) dan Safety Integrity Level (SIL) dengan Metode Fault Tree Analysis (FTA) pada Fuel Gas Superheat Burner Unit Ammonia PT. Petrokomia Gresik," Institut Teknologi Sepuluh Nopember, Surabaya, 2016.
[4]. T. Farihah and D. Krisdiyanto, "Penerapan 5S (Seiri, Seiso, Seiton, Shiketsu, Shitsuke) pada UKM Olahan Makanan di Dusun Sempu, Desa Wonokerto," Jurnal Bakti Saintek, vol. 2, pp. 43-49, 2018.
[5]. A. Yoshana, M. F. Putra, H. Santoso and S. Hartini, "Penerapan Sistem Manajemen Mutu ISO 45001:2008 SMK3 Di PT Petrindo Semesta untuk Mengurangi Kecelakaan Kerja dan Menciptakan Lingkungan Kerja yang Sehat," Jurnal Anadara Pengabdian Kepaada Masyarakat , vol. 1, pp. 166-170, 2019.
Published
2021-04-05
How to Cite
SARI, Tri Novita; PRADIPTO, Masri; HARTINI, Sri. Sosialisasi Perbaikan Metode Kerja Dengan Prinsip 5S Berdasarkan Identifikasi Hazard Di CV. Epen Garage X Azizskip. JATI EMAS (Jurnal Aplikasi Teknik dan Pengabdian Masyarakat), [S.l.], v. 5, n. 1, p. 9-14, apr. 2021. ISSN 2550-0821. Available at: <http://journal.fdi.or.id/index.php/jatiemas/article/view/378>. Date accessed: 18 oct. 2021. doi: https://doi.org/10.36339/je.v5i1.378.